1. Swap Pin for cable Blue and white on cable.
2. Complete installation as per Mid City installation instructions and chose Drone Telematic kit if needed.
3. Connect the Starter Connection Cable to the Black connector on the Mid City starter. Do not connect to blue connector
4. The power, hardwire, and ground are optional on the AC202, assuming the Mid City provide power and ground.
Open the Autoconnect App or Dashboard
2. Log in to the Autoconnect device installed using the SID # as both username and password.
3. Go to the command tab on the bottom of the app, or the remote function of dashboard
4. Scroll to the bottom of the commands and send the required Installer Protocol.
5. For Mid Modules select “Set Telematic Protocol”.
6. Test all the application functions (Start, Stop, Lock, Unlock, Auxiliaries, ETC. GPS).
7. We recommend affixing the SID Sticker to the door jamb of the vehicle.
pg
11
Mid City (SKSNxxx)
Installation Steps
Programming and Testing
INSTALLATION TYPE 9
AC202
AC202
White - Key Ignition Source (+)
Red 12V +
Black Ground
Fuse
Fuse
RF CONN 3
RF CONN 2
RF CONN 1
RF CONN1
Yellow/Black: Input 1 (Optional (-), Can be used for hardwired alarm)
Yellow/Brown: Input 2 (Optional (-))
Blue/Green: Output 1 (Optional (-))
Green: Output 2 (Starterkill (-))
External Connector: Not used
Starter
Connection
Cable
Swap Blue with
white at
the connector
