1. Program DEI Module as per installation instructions for vehicle (Ensure to have the SMART START Option ENABLED)
2. Complete installation as per installation diagram.
3. Connect Data link cable to the Bypass Module. You will need the extension cable “Starter Connection Cable” available from CTS
Tracking.
3b. Connect Power, Ground and Ignition. Ignition must be connected
4. Mount the Autoconnect module as described in the Autoconnect Install guide Step 3.
1. Open the Autoconnect App or Dashboard
2. Log in to the Autoconnect device installed using the SID # as both username and password.
3. Go to the command tab on the bottom of the app, or the remote function of dashboard
4. Scroll to the bottom of the commands and send the required Installer Protocol.
5. For DEI Modules select “Set D2D Protocol”.
6. Test all the application functions (Start, Stop, Lock, Unlock, Auxiliaries, ETC. GPS).
7. We recommend affixing the SID Sticker to the door jamb of the vehicle.
pg
9
DEI (DBALL2/3, 4x10 / 5x10)
Installation Steps
Programming and Testing
D2D PORT
INSTALLATION TYPE 7
AC202
AC202
White - Key Ignition Source (+)
Red 12V +
Black Ground
Fuse
Fuse
RF CONN 3
RF CONN 1
RF CONN 2
RF CONN1
Yellow/Black: Input 1 (Optional (-), Can be used for hardwired alarm)
Yellow/Brown: Input 2 (Optional (-))
Blue/Green: Output 1 (Optional (-))
Green: Output 2 (Starterkill (-))
External Connector: Not used
Starter
Connection
Cable
