Autocall 4007ES Скачать руководство пользователя страница 31

Страница: 31 / 34

Page 29

579-1165AC Rev C

4007ES Operator’s Manual

13.16 NetDiag

Tap the

NetDiag

button to access the

Net Diagnostics Menu

screen, where the following functions for analyzing and gathering network information

are available. Navigate to each option by using the and buttons. To select an option, tap the

Select Item

button when it is highlighted.

Net Diagnostics Menu

Select

Item

Date

Time

Network Diagnostics are not Active

This node is ONLINE

Network is Running in style 7

Diagnostics by Node

Net Diag Logging

Network Tallies

Diag Tbls Missing Node Troubles

Diagnostic Message options

Relay Mode

Repeater/Reset for all Nodes

Current details of network

Stop ALL Net Diag Functions

•

Diagnostics by Node

: Use this option to choose a node and display its details.

•

Net Diag Logging

: Use this option to choose which network parameters to log, and where these

logs are saved.

•

Network Tallies

: Use this option to choose whether to view or clear network tallies.

•

Diag Tbls Missing Node Troubles

: Use this option to enable or disable missing node Troubles.

•

Diagnostic Message Options

: Use this option to select the node to which diagnostic messages

are sent, the message directions, and the number of message retries.

•

Relay Mode

: Use this option to choose whether or not the current node is in Relay Mode.

•

Repeater/Reset for All Nodes

: Use this option to reset/restore nodes, or to put the nodes in

Repeater Mode.

•

Current Details of Network

: Use this option to obtain information on the number of nodes

configured, communicating and in Repeater Mode, as well as the Monitor node, Left End node,

Right End node, and the node’s Repeater source. Use this option to also determine the network

topology, attendance, and the node IDs.

•

Stop ALL Net Diag Functions

: Use this option to stop all the network diagnostic functions that

are currently running.

Содержание 4007ES



































Результаты поиска

Содержание 4007ES

Отзывы:

Бренды по названию

Популярные бренды

Autocall 4007ES, Руководство оператора

Результаты поиска

Содержание 4007ES

Отзывы:

Бренды по названию

Популярные бренды