Autocall 4007ES, Руководство оператора

Страница: 30 / 34

Page 28 579-1165AC Rev C
4007ES Operator’s Manual
13.13 TrueAlert NAC Test
Tap the TrueAlert NAC button to perform a TrueNAC Voltage Drop Test. This test ensures that A4906 devices are installed properly by determining the
line voltage for compatible notification appliances that are connected to a TrueAlert Power Supply (TPS) Signaling Line Circuit (SLC), under worst-case
panel operating conditions. After pressing the TRUENAC button, the following options are available:
TrueAlert NAC Test Menu
All Single
USER
BUTTON 1
USER
BUTTON 2
USER
BUTTON 3
Date
Time
• All : Press this button to test all the TPS SLC lines at once. After pressing this button, these
options become available:
- HornON : Press this button to set the horns to high volume during the test.
- HornOFF : Press this button for a silent system test.
• Single : Press this button to test each TPS SLC line separately.
Note:
• The results of the TrueNAC Voltage Drop Test are displayed on the screen. A Trouble condition is
generated for every device that has failed the test.
• If Horns are on, the panel will perform two passes: one with horns on and one with horns off.
This is done to enhance the accuracy of A/Vs measurement.
13.14 CO Algorithms
Tap the CO Algorithms button to access the IDNet CO Algorithms Menu screen. The following functions are available:
IDNet CO Algorithms Menu
Off On
USER
BUTTON 1
USER
BUTTON 2
USER
BUTTON 3
Date
Time
• Tap the Off button to disable the IDNet CO Algorithms. This is useful when smoke testing the
IDNet CO devices.
• Tap the On button to enable the IDNet CO Algorithms.
13.15 Install Mode
Install Mode is a feature that minimizes the number of Troubles that occur when the system is being installed or is undergoing extensive service, by
placing points and cards that can cause Troubles in Install Mode during those times. Install Mode raises a single “INSTALL MODE ACTIVE” Trouble,
regardless of the number of items in it.
Tap the
Install button to access the Install Mode Menu screen. The following functions are available:
Install Mode Menu
IViewMod
USER
BUTTON 1
USER
BUTTON 2
USER
BUTTON 3
IAddMiss IAddOpens IRemvNorm
IRemvAll
Date
Time • Tap the IViewMod button to view all the items in Install Mode.
• Tap the IAddMiss button to add items to Install Mode.
• Tap the IAddOpens button to add all open circuits to Install Mode.
• Tap the IRemvNorm button to remove an item from Install Mode.
• Tap the IRemvAll button to remove all the items from Install Mode.