Autocall 4007ES, Руководство оператора

Страница: 21 / 34

Page 19 579-1165AC Rev C
4007ES Operator’s Manual
9 Panel Setup
Use the Panel Setup function to modify the configuration of the basic panel components.
Tap on a menu icon to access that option’s main screen. Refer to
User Access Level on page 15 for access levels required to use each option inside
the
Panel Setup
screen.
9.1 Panel Setup Screen Buttons
Fig 28: Panel setup buttons
Panel Setup
Swap Config
Set Time/Date Touchscreen
Calibration
Mass
Storage
USER
BUTTON 1
USER
BUTTON 2
USER
BUTTON 3
Date
Time
100%
Fig 29: Panel Setup screen
9.1.1 Swap Config
Swap Config
Show Alternate
Config Version
Use Alternate
Config
USER
BUTTON 1
USER
BUTTON 2
USER
BUTTON 3
Date
Time
Tap the Swap Config button to access the following functions. These functions allow roll back to the
previous versions of the panel firmware.
•
Show Alternate Config Version : Tap this button to display the previous version of the panel
firmware.
• Use Alternate Config Version : Tap this button to install the previous version of the panel
firmware.
9.1.2 Set Time/Date
Day Month Year
Hrs Mins
Sec
: :
1 2 3
4
5 6
7
8 9
0
Panel Setup
01 01 01
01 01
01
Date
Time
Tap the Set Time/Date button to access the screen where the date and time displayed at the panel
can be updated:
1. Press the button that corresponds to either day, month, year, hour, minute or second.
2. Enter a new value using the touchscreen keypad.
3. Repeat steps 1 and 2 for the date and time values that remain.
4. Press the Accept button for the new date and time to take effect immediately.