Autocall 4007ES, Руководство оператора

Страница: 25 / 34

Page 23 579-1165AC Rev C
4007ES Operator’s Manual
12 Search
Use the
Search
screen to look for configured points under panel control. Refer to User Access Level on page 15 for access levels required for each
option inside the
Search
screen.
12.1 Search Screen Buttons
Fig 33: Search Screen Buttons
Search
New
Search
COMMON TROUBLE POINT FOR
NODE: 4
Date
Time
1
ZN1 ZN1
ZN2 ZN2
ZN3 ZN3
100%
Fig 34: Search screen
12.1.1 New Search: Search for a Specific Point
The point search keypad opens automatically when the Search screen is accessed or by pressing the New Search button.
1. Select the desired point type. For example, to select an IDNet point, press on the IDNet button.
2. Select the desired point number. For example, to select an IDNet point M1-1-0, enter “1-1-0”.
AUX
ZONE SIG
FB IO IDNet
Pseudo
Analog
LIST
ADDR
New
Search
3 1 2
4 5
6
7 8 9
0
M1-1-0
.
IDNet
100%
Fig 35: Search screen
Note: Point numbers are first generated when the ES Panel Programmer is used to program points into the panel.
3. Tap the Accept button to execute the search. Tap the Erase button to erase the last character entered. Use the Return button to return to
the Search screen.
12.1.2 New Search: Browse the List of Configured Points
1. If opened, close the keypad by pressing anywhere outside the keypad. You will see a list of all the points configured on the network.
2. Use the Scroll Up and Scroll Down buttons to navigate the list, the Accept button to get more details on a point, and the Return button to
return to the System Menu screen.