Auto-Sleepers Peugeot Kemerton Скачать руководство пользователя | Manualshive

Страница: 61 / 106

background image

9-15

FITTED EQUIPMENT

Gas Lockouts

Gas lockouts must be cleared by turning the
selector knob from gas (flame) position to ‘off’
position then back to the ‘on’ position. The
complete sequence of switch movements
must be completed within 2.5 seconds for a
lockout to be successfully cleared. If there is
air in the gas line, eg after a gas bottle
change, the space heater may require
several attempts before it lights.

Other Lockouts

If the lockout is caused when the unit is
operated on electric, the lockout can be
cleared by turning the selector knob from
electric ‘on’ position to ‘off’ position then back
to the ‘on’ position. The complete sequence
of switch movements must be completed
within 2.5 seconds for a lockout to be
successfully cleared.

Note:

A cycling of the power supply to the

unit will not clear a lockout. Some gas
lockouts, e.g. ignition lockout and combustion
air faults will still permit use of the appliance
in electric only operation. If the problem
persists contact Whale Support on +44
(0)845 217 2933.

Winterising

When using the heater in winter ensure the
flues are not blocked by snow or fallen leaves
etc. When the Space Heater is not going to
be used for a long period of time, we
recommend that the open end of the
combustion air and exhaust flue are covered
to prevent ingress of leaves etc.

Service Support

For serviceable parts advice please contact
Whale Customer Support:

Tel: +44 (0)845 217 2933

Email: [email protected]

Warranty

The Whale Space Heater is covered by a 3
year warranty.

Please complete the enclosed warranty card
and return to Whale.

For warranty details, please refer to the
Whale Website www.whalepumps.com

Note that any alteration to the appliance,
including flue components, use of non-Whale
spare parts/accessories and non-observation
of the installation and operation instructions
shall lead to cancellation of the warranty and
exclusion of liability claims and results in it
becoming illegal to use the appliance.

Specification

Nominal heat input, Gas: 2.0 kW.

Gas Consumption: 150g/h.

Nominal heat input, Electric: 2.0 kW.

Mains Electric:

Nominal voltage: 230V ac: 50 Hz.
Power options: 500 / 1000 / 2000W.
Maximum current ac: 9 Amps.

Battery Supply:

Nominal voltage: 12V dc.
Maximum current dc, gas operation: 1.7
Amps (0.01 Amps on standby).
Maximum current dc, electric operation:
2.2 Amps (0.01 Amps on standby).

«
...
59
60
61
62
63
...
»

Содержание Peugeot Kemerton











































































































Отзывы:

Нет отзывов

Похожие инструкции для Peugeot Kemerton

1985 Jamboree Rallye

Бренд: Fleetwood Страницы: 46

Бренд: Gulf Stream Страницы: 37

Hummingbird 2018

Бренд: Jayco Страницы: 159

Бренд: Jayco Страницы: 112

2014 Melbourne Class C

Бренд: Jayco Страницы: 121

Бренд: Jayco Страницы: 122

2014 JAY FLIGHT

Бренд: Jayco Страницы: 128

Бренд: Jayco Страницы: 134

Бренд: Jayco Страницы: 169

EAGLE FW HT 2020

Бренд: Jayco Страницы: 201

Бренд: elddis Страницы: 134

Бренд: Winnebago Страницы: 74

LeisureStar 852

Бренд: Starcraft Страницы: 24

1991 Travel trailer

Бренд: Starcraft Страницы: 30

SUPER LITE 2021

Бренд: Starcraft Страницы: 163

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды