Auto-Sleepers Broadway FB, Руководство пользователя, Страница: 46 / 130

7-22
CONNECTION OF SERVICES
3.6 Solar Charge Management
The EC500 PSU incorporates a built-in solar charge management feature, which will control the
input from a solar panel (when fitted, maximum rating 120W). Depending on the charge state of
the batteries, the solar power will be directed to the required battery, and continuously monitored
to ensure optimum operation. For this system to operate intelligently, the shutdown button should
be left switched on. If the shutdown button is turned off then the solar panel will charge the
leisure battery only.
3.7 Water System Operation
The control panel pump button operates the internal (onboard) water pump. This pump will draw
water from the internal (onboard) water tank.
The water tanks (fresh & waste) incorporate a level warning feature to warn the user when the
fresh water level drops below 25% or when the waste water level reaches 100%.
If the water pump power is turned on and the fresh water level drops to below 25% a warning
beep will be heard information will be shown on the screen. To cancel the warning, press the
select button.
If the water pump power is turned on and the waste water level rises to full (100%) a warning
beep will be heard and information will be shown on the screen. To cancel the warning, press the
select button.
These warnings will not be repeated unless the water pump power switch is turned off and on
again. This is to ensure the warning does not become a nuisance.
3.8 Frost Protection
On vehicles fitted with water tank frost protection, the EC480 control panel frost protect switch
can be used to turn the feature on or off.
Note: This feature is NOT enabled at the time of manufacture.
3.9 Awning Light Operation
The awning light is control by the control panel awning / aux button. The awning light is also
linked to the remote door locking. If the doors are locked or unlocked the light will illuminate for a
short period of time. This is a dealer configurable item.
3.10 Electric Step Operation
On vehicles fitted with an electric step, this is operated by a button near the entry door. Press
and release the button to move the step in or out. One press of the button will move the step out,
a further press will move the step in again.
If the engine is started the step will move in automatically, after a short warning buzzer. If this
operation fails due to an obstacle or mechanical failure a buzzer will sound continuously to warn
that the step is still in the out position, and therefore requires your attention.
The electric step is also linked to the remote door locking. If the doors are unlocked the step will
move out, if the doors are locked the step will move in. This is a dealer configurable item, and
can be turned off if not required.