Auto-Sleepers Broadway FB, Руководство пользователя

Страница: 76 / 130

9-12
FITTED EQUIPMENT
Key increases the room temperature
(max. 30ºC) by 1ºC
Key reduces the room temperature (min.
5ºC) by 1ºC
A change in the room temperature needs to
be confirmed with
Energy selection
When the menu is selected the yellow LED
shines.
Depends on summer/winter operation (see
setup).
- Use key or to select the energy
source and confirm with
- Bar shows current mode
Summer operation
230V - 4A (electro mode 230V, 900W)
230V - 8A (electro mode 230V, 1800W)
Gas powered
Winter operation
230V - 4A (electro mode 230V, 900W)
230V - 8A (electro mode 230V, 1800W)
Gas powered
230V - 4A and gas (mixed operation gas and
electro mode 900 W)
230V - 8A and Gas and gas (mixed operation
gas and electro mode 1800W)
Note: If electro or mixed operations are
selected and there is no 230V power supply,
the heating will not function.
Water temperature
When the menu is selected the yellow LED
shines.
During the heating-up phase, the set water
temperature flashes in the main screen.
- Use key or to select the water
temperature and confirm with
- Bar show current mode
Depends on summer/winter operation (see
set-up)
Summer operation
Water 40ºC
Water 60ºC
Winter operation
Water > 0ºC (heating without controlled
water temperature, heating
has priority)
Water 60ºC
Timer mode
- The heater runs in timer mode as soon
as one or both timers have been
activated in the setup.
- “Timer On” appears in the main screen.
- The heater is only active in the set time
window (active timer).
- Only the energy selection can be
changed in the case of an active timer.
- Only the energy selection can be
changed in the case of an active timer.
- A change in the room or water
temperature will automatically switch the
control system into manual mode.
Set up
In the main screen display you can enter the
setup menu via the setup key.
The following settings can be made:
Back (return to main screen)
Timer 1 on/off (select on/off wahlen)
Timer 2 on/off (select on/off wahlen)
Summer / Winter (select summer/winter)
Set clock
Set timer 1
Back (Return to main screen)
Start (Set start time)
Stop (Set stop time)
Water (Set water temperature)
Temp (Set room temperature)
The timer settings can be made every day
until the timer is switched off. If the room or
water temperature is changed outside the
timer menu, the timer is automatically
switched off.