Auto Meter PowerNet BCT-460DTNA Скачать руководство пользователя страница 2

Страница: 2 / 33

CONGRATULATIONS!

BCT-460DTNA

Load Test Capacity ...............................................120 Amp

Battery sizes.........................................................100-1600 CCA

Display ................................................................7" (1280X800) LED, Wide Viewing Angle

Volt Ranges ..........................................................Digital 0-30

Cooling .................................................................Vented

Leads ...................................................................Load Amp-4 ft., 6 Gauge

Size ......................................................................19" X 9" X 3"

Internal Battery .....................................................7.4 Volt Lithium Ion

Weight ..................................................................7 lbs.

What to Expect from the BCT-460DTNA:

The BCT-460DTNA is a portable full-featured menu-driven battery tester, starting, and

charging system analyzer that provides quick, professional load results using Auto Meter's

Digital Pulse Load. The BCT-460DTNA is user friendly. It guides you through the test and

tells you what to do next.

Caution:

The BCT-460DTNA grill may get hot after repeated use. Be sure to hold the unit

from the side grips only. Keep hands away from the grill. Keep oil and liquids away from

the grill and load coils.

You have purchased one of Auto Meter's hand-held Electrical System Analyzers. It is designed

to test each component of a truck’s electrical charging and starting system with speed and

accuracy. If you should have any questions about your tester, testing procedures, or service

see the last page of this booklet for contact information.

Содержание PowerNet BCT-460DTNA


































Результаты поиска

Содержание PowerNet BCT-460DTNA

Отзывы:

Похожие инструкции для PowerNet BCT-460DTNA

Бренды по названию

Популярные бренды

Auto Meter PowerNet BCT-460DTNA, Руководство оператора

Результаты поиска

Содержание PowerNet BCT-460DTNA

Отзывы:

Похожие инструкции для PowerNet BCT-460DTNA

Бренды по названию

Популярные бренды