17
The BCT-
460DTNA will
instruct the user
to visually check
the starter cables
and connections.
The user must
check off to
proceed.
The BCT-460DTNA will
conduct a starter cable
voltage drop test.
The BCT-460DTNA will
display the results. If the
voltage drop is good the user
can proceed to starter test.
The BCT-460DTNA
will show the user
how to connect the
tester to the starter.
The larger red clamp
goes on the positive
(+) starter post.
Larger black clamp
goes on the negative
(-) starter ground.
The small red clamp
goes to the Battery
Pack positive (+).
The small black
clamp goes to
the Battery Pack
negative (-).
The tester will
allow the test
to start when it
detects good
connections on all
four clamps.
The BCT-460DTNA
will make sure the
engine is off, if it
isn’t the following
screen will appear,
if it is press the
start button.
POWERNET (STARTER CABLE VOLTAGE DROP TEST)
Next Page
