21
Start the Engine
The BCT-460DTNA
will instruct the user
to hold the engine
RPM at 1000 and
wait for the voltage
to stabilize. The
user then can press
the button when the
voltage is stable
If the BCT-460DNTA
determines that more loads
are needed to fully test the
alternator, it will ask the user
to turn on the loads such as
the headlights and fans. If the
loads are OK the the unit skips
this screen and proceeds to
the governor speed portion of
the test.
POWERNET (ALTERNATOR TEST)
The BCT-460DTNA
will make some
preliminary
measurements
to prepare for the
alternator test.
Select alternator
type and enter rated
current. Press start
to begin test.
Turn key to run
position. Wait for
ECU to power up.
