9
Successful authorization (authentication) will be
confirmed by the particular number of the indication
signals corresponding to the number of the being
entered emergency code.
The service/valet mode
The service/valet mode is used for temporary
deactivation of the anti-theft system when the car has
been provided for service maintenance (without the
necessity of telling the service staff about the device).
The service/valet mode might be activated regardless
of the ignition state. After signing in by the key fob
or the smartphone press the service button 10 times.
The button should be pressed within two minutes
after entering the PIN-code. The time gap between the
pressings should not exceed two seconds. The service/
valet mode activation will be confirmed by 10 light or
sound signals.
The service/valet mode deactivation is performed by
pressing the service button 10 times when the key fob
or the smartphone is present in the car. The double
indication signal will confirm that the service/valet
mode has been deactivated.
The service/valet mode will not be deactivated
when the power has been switched off or at the
attempt to switch ON/OFF the ignition. Use the
emergency authorization code for the service/valet
mode deactivation in the case the key fob or the
smartphone is not present within the coverage of
the device (see page 8).
!
Содержание Kvant 231
