AUTHOR Alarm Kvant 231, Руководство по эксплуатации

Страница: 14 / 40

14
If the two-step authorization (authentication) mode
should be deactivated:
1. Switch ON the ignition without starting the engine.
2. Sign in by the key fob or the smartphone and enter
the valid PIN-code. Two signals of indication will be
provided.
3. Enter the immobilizer setup menu. For this purpose
press the service/valet button and hold it pressed
during 10 seconds. The LED or the buzzer will
start providing indication signals once in a second.
Release the service/valet button.
4. In order to choose the sub menu №5 press the
service/valet button five times. The LED or the
buzzer indication will confirm successful undergoing
of the procedure with five signals.
5. In order to choose the two-step authorization
(authentication) setup menu press the service/valet
button four times. The LED or the buzzer indication
will confirm successful undergoing of the procedure
with two signals. It indicates that the two-step
authorization (authentication) mode is switched ON.
6. To deactivate the two-step authorization
(authentication) mode, press the service/valet
button once. The LED or the buzzer will confirm
successful undergoing of the procedure with one
indication signal.
7. Switch OFF the ignition.
If the two-step authorization (authentication)
mode has been deactivated, authorization
(authentication) may be undergone only by the
PIN-code. The key fob or the smartphone is not
required anymore.
!