AUTHOR Alarm Kvant 231, Руководство по эксплуатации

Страница: 13 / 40

13
4. To choose the sub menu №5 press the service/valet
button 5 times. The LED or the buzzer will confirm
successful undergoing of the procedure with 5
signals of indication.
5. To choose the two-step authorization
(authentication) setup menu press the service/
valet button four times. The LED or the buzzer will
confirm successful undergoing of the procedure with
one indication signal. It indicates that the two-step
authorization (authentication) mode is switched
OFF.
6. To activate the two-step authorization
(authentication) mode press the service/valet
button two times. The LED or the buzzer will confirm
successful undergoing of the procedure with two
indication signals.
7. Assign the PIN-code combination to the service/
valet button. The PIN-code can consist of 3 to 10
pushes. The time gap between the pushes should
not exceed two seconds. There is no difference
between «long» and «short» pushes of the button.
When the PIN-code is entered the LED or the buzzer
will confirm successful undergoing of the procedure
with two indication signals.
8. Enter the PIN-code once again. If the PIN-code has
matched with the previously entered one - two
indication signals will be provided and the PIN-code
will be successfully saved.
9. Switch OFF the ignition.
Two-step authorization (authentication) mode is
automatically deactivated when deleting all the
key fobs and smartphones from the memory of the
system.
!