AUTHOR Alarm IGLA, Руководство по обслуживанию

Страница: 36 / 48

33
Deleting of the key fobs
In the case the key fob has been lost, it should be
deleted out of the device memory in order to prevent
the car from being stolen. In order to do this:
1. The current PIN-code should be changed to the same
one (see the user guide).
2. Keeping the ignition turned on, press the service/
valet button
1
10 times. The service/valet button
should be pressed within 10 seconds after the
PIN-code has been rerecorded.
If the PIN-code has been successfully changed, the
system will provide the double indication signal. After
the key fob has been deleted, two double indication
signals will be provided (in 5-10 seconds after the last
pushing of the service/valet button).
This procedure erases all the key fobs and the
smartphones previously recorded in the system.
Key fobs adding
Adding the key fobs with the button
This method is meant for the key fobs with the button on
the print. In order to add the key fobs without buttons,
use the respective algorithm (see page 35).
The key fobs with the button may be tied only to
the IGLA ALARM with the BLE nRF52 module
(see
the marking on the inner part of the manual cover).
For automatic quick key fobs adding to the system,
the Author Flasher software might be used.
1 See the official website: https://service.author-alarm.com/
!
!
!