AUTHOR Alarm IGLA, Руководство по обслуживанию

Страница: 27 / 48

24
When attaching the next device, all the previously
attached devices should be disconnected from the
CAN‑bus.
3. Twist the red and the gray wires of the KORD-
module together and connect them to a «plus»-wire
in the car (the hood lock should open, close and
open again within 5 seconds).
4. Turn off the ignition and disconnect the red and
the gray wires from the «plus»-wire for restarting
of the device.
5. Connect the red wires of the devices to the
«plus»-wire again (do not connect the gray wire
anymore).
Alignment with the KEYLESS BLOCK
A 1CAN/1LIN KEYLESS BLOCK module can be
aligned with an IGLA ALARM in case they are
connected to the same CAN-bus. If the KEYLESS
BLOCK should be aligned with a 2CAN/2LIN IGLA
ALARM, the connection should be conducted only
through the CAN‑A‑bus.
1. Delete all the previously added key fobs/
smartphones out of memory of the IGLA ALARM
(see page number 33).
2. Add all the necessary key fobs and smartphones to
the KEYLESS BLOCK (see the service manual and the
user guide to the KEYLESS BLOCK).
!
!