
20
3.
Launch the application, press «Create account» and sign
up in the system using the phone number.
4.
For adding the COMPASS or the ATLAS device to the
IGLA ALARM, the plastic card included in the same set
with the ATLAS/COMPASS device is required (use the
open code
on the top of the card).
Do not erase the protective covering upon the other
codes indicated on the card. These secret codes are
meant to be used only by the car owner.
Use only
open code in order to add the device.
The open
code may be used just once for initial adjustment
of the device.
5. Supply the devices with power.
6. Transfer the IGLA ALARM system to the PIN-code
change mode by one of the next ways:
• Connect the red and the gray wires of the IGLA
ALARM to a «plus»-wire in the car.
• In the case the device has already been set up,
enter the valid PIN-code
1
once again when the
accelerator is fully pressed
2
.
If the current PIN-code involves slight push of the
accelerator, enter the PIN-code once again and
after that press the accelerator to the floor.
7. Keeping the ignition on, open the Author Connect
mobile application, proceed to the window
«Operation», press the «Settings»-button (the gear
wheel), press «Connect/attach» (opposite the IGLA
ALARM device) in the new-opened window. The
modules will be aligned.
1 The initial PIN-code adjustment algorithm is described on page
number 27.
2 A different operative organ is used in some of the cars instead of the
accelerator (see the official website https://service.author-alarm.com/).
!
!
Содержание IGLA
Страница 1: ...SERVICE MANUAL ...
Страница 2: ......
Страница 47: ......
Страница 48: ...User Manual ...