AUTHOR Alarm IGLA, Руководство по эксплуатации

Страница: 29 / 52

29
Below you will find issues that can arise while using
Author Config app and the solutions.
1.
To have the device displayed in Author Config
it is
necessary to:
• launch the Author ID app and press the «Key»
button on the screen;
• wait for 5 seconds;
• return to Author Config app and select the device
that is now in the list;
• wait till the connection is established and all
details are displayed on the screen.
2. If you logged out of Author Config app you have 10
seconds when you can return without authorization.
After the message «Device is switched off» is displayed,
wait for some time and find the device in the list of
the linked devices and select it again. Wait till the
connection is established and all details are displayed
on the screen.
3. If it is necessary to start Author Config again after
the settings were changed do the following steps:
• press the button «ReConnect Author ID» in the
low right corner of the Author Config app;
• go to Author ID app;
• press the «Key» button in the center of the screen,
if the button was not active (grey). If the button
was active (orange), press it, wait for 6 seconds
and press it again to switch on;
• return to Author Config app within 40 seconds
and select the device that is now in the list;
• wait till the connection is established and all
details are displayed on the screen.