AUTHOR Alarm IGLA, Руководство по эксплуатации

Страница: 20 / 52

20
6. Enter the current PIN-code once again. If PIN-codes
match there will be 2 indication signals and the
PIN-
code will be successfully saved .
If there are 4 indication signals, it means the PIN-code
do not match and the PIN-code has not been saved .
Switch OFF the ignition for 3 sec. and repeat the items
1-6.
7. Switch OFF the ignition.
Memorize the new PIN-code or write it down after
it has been changed.
Do not leave information
about new PIN-code and the plastic card with the
Emergency code inside the car!
PIN-code emergency resetting
In case the current PIN-code is lost the car-owner can
reset it and set the new one. In order to reset the PIN-
code one needs the plastic card with Emergency code,
hidden under the protective layer. The card is a part if
the anti-theft system IGLA. Prepare the card before the
PIN-code resetting procedure.
1. Switch ON the ignition without starting the engine.
2. Press the brake pedal and while keeping it pressed
press the accelerator* pedal a certain number of
times as far as it can go where the number is equal
to the first figure in the Emergency code. Release
the brake pedal. The first figure of the code will be
entered.
* For some car model other controls are used instead of an accelerator pedal
(see the annex).
!