AUTHOR Alarm IGLA, Руководство по эксплуатации

Страница: 42 / 52

42
The state of option set in the system by default
(«Switch ON», «Switch OFF») is marked with grey color
in the table. The figures in the table show how many
times the service button shall be pressed to choose a
particular option state.
For some car models (see the section System
compatibility on our web-site author-alarm.com) some
additional options are possible. For example: automatic
switch off START-STOP function, indication signal
change, et.
In order to change the option state do the following:
1. Switch ON the ignition without starting the engine
and enter the PIN-code to authorize.
2. Press the accelerator pedal* as far as it can go and
keep it pressed.
3. Press the service button the number of times needed
to reach the particular state – «Switch ON» or
«Switch OFF» (see the figures in the corresponding
column in the table). For example, 16 times to
switch the Anti Hi-Jack mode ON or 17 to switch it
OFF. The indication signals will confirm the action.
The option state will be changed.
4. Release the accelerator pedal*.
If the «Slight touch on accelerator pedal» is used
as a service button, after the authorization in the
system (item 1) perform the item 3, then press the
accelerator pedal as far as it can go and keep it
pressed until you see the indication.
* For some car model other controls are used instead of an accelerator
pedal (see the annex).
!