background image

 

 

   

 

 

             

Document NO.: RD-529-39-001 

                                                                                                                        Version: A     

- 1 - 

EN14604:2005/AC: 2008 

Smoke Alarm User Manual 

 

Model number: GS529                     

Ref

ST529

 

Thank you for purchasing our smoke alarm

 

with wireless and 

heat  detection.  Please  take  a  few  minutes  to  read  the  user’s 

manual  thoroughly  and  familiarize  yourself  and  your  family 

with its operation. And save it for future reference.     

 

 

 

 

                          Diagram 1 

 

Product Specifications: 

Power 

:built-in  DC3V(CR17450)  Lithium  battery 

(battery 

can be replaced.) 

Operation current 

:

 

90mA 

Alarm volume 

:

 

85dB(A) at 3 meters. 

Smokesensitivity 

:0.09-0.15dB/m 

Local smoke alarm sound pattern:   

BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s – BI 0.5s – 

pause 1.5s- BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s 
–  BI  0.5s  –  pause  4.5s,  with  the  red  LED  flashing 

every 1 second, repeat this alarm pattern. 

Wireless alarm pattern:   

Bi  0.2s  -  pause  0.1s  -  Bi  0.2s  -  pause  1.2s,  with  the             

red LED flashing every 1.0 second, repeat this alarm     

pattern. 

Description: 

This unit is a photoelectric 3V DC smoke alarm. It is   

operated  by 

DC 3V(CR17450) lithium battery

.  With  the 

photoelectric  technology,  it  is  more  sensitive  in  detecting 

slow smoldering   

fires which generate light smoke, little heat and may smolder 

for hours before bursting into flames. This smoke alarm does   

not contain any radioactive material. Smoke alarms should be 

installed  in  every  room  (except  the  bathroom  and  kitchen),     

finished attics and basements, making sure the people in the 

home  will  be  able  to  hear  and  respond  to  the  alarm  sound. 

For  minimum  protection,  you  should  install  an  alarm  on 

every level of the home particularly  outside sleeping rooms.   

Each  alarm  should  be  placed  in  the  middle  of  the  ceiling  of 

each  room  to  be  protected.  Typical  single  storey  dwelling 

installation  recommendations:  Install  a  smoke  alarm  on  the 

ceiling inside each bedroom and in the hallway outside each 

separate  sleeping  area.  If  a  bedroom  area  hallway  is  more 

than 30 feet long, install a smoke alarm at each end. If there 

is a basement: install a smoke alarm on the basement ceiling 

at  the  bottom  of  the  stairwell.  Typical  multi-storey  dwelling 

installation  recommendations:  Install  a  minimum  of  one 

smoke alarm on each occupiable level of the home. Install a 

smoke alarm on the ceiling or wall inside each bedroom and 

in  the  hallway  outside  each  separate  sleeping  area.  If  a 

bedroom  area  hallway  is  more  than  30  feet  long,  install  a 

smoke alarm at each end install a smoke alarm at the top of a 

first – to- second floor stairwell. 

 

Important Safety Information: 

1:The test button accurately tests smoke alarm functions. Do 

not use any other test method. Test smoke alarm weekly to 

ensure proper operation. 

2:If  you're  sure  it  isn't  a  really  alarm,  open  windows  or  fan 

the air around smoke alarm to reset and silence it. 

3:User  to  install  this  product  needs  to  comply  with  all  local 

and national electrical installation and building codes. 

4:This  smoke  alarm  is  designed  to  be  used  inside  a  single 

family home only. In multifamily buildings, each individual 

living  unit  should  have  its  own  smoke  alarms.  Do  not 

install  in  non-residential  buildings  as  this  smoke  alarm  is 

not a substitute for a complete alarm system. 

5:Install a smoke alarm in every room and on every level of 

the home. Smoke may not reach the smoke alarm for many 

reasons. For example, if a fire starts in a remote part of the 

home, on another level, in a chimney, wall, roof, or on the 

other side of a closed door, smoke may not reach the smoke 

alarm  in time to alert household members. A smoke alarm 

will not promptly detect a fire except in the area or room in 

which it is installed. 

6:Smoke alarm may not alert every household member every 

time. The alarm horn is loud in order to alert individuals to 

Содержание GS529








Отзывы: