55
To check the sensors
on page 51 to select the test
vehicle.
2. Hold the top right corner of the tablet close to the sensor mounted
on the wheel. The trigger antenna is embedded in the tool’s upper
right hand corner.
3. On the tablet, select the wheel you wish to trigger by either selecting
the image of the wheel on the pictured vehicle or by selecting the
corresponding wheel notation (FL, FR, RR, RL). Tap
Trigger
button
to activate this sensor.
4. Once the sensor is successfully triggered, the information of the
sensor will display.
If the battery level of a sensor is low, a red low battery icon will display
beside the wheel on the screen.
Once triggered, the wheel icons will display green or red indicating sensor
status. Refer to
Table 5-2 Possible Results for Triggering
on page 55 for
details.
The sensor position, sensor ID, tire pressure, tire temperature, sensor
frequency and sensor battery information of the triggered sensor will display
on the table.
Figure 5-8
Sample Check Screen 2
