91
1) Tap
Steering Angle Sensor Calibration
from the
SAS function menu
to enter the function screen.
2) Follow the on-screen instructions to set the ignition on/off as guided. The
vehicle battery voltage signal should be in the range 12.5
– 13.5 volts to
proceed with this service, otherwise the scan tablet will display a warning
message.
3) Ensure the steering wheel is in the central position and the front wheels
are in the straight position. Then tap
OK
to proceed.
4) When the operation is finished, the scan tool will display a confirmation
message. An error message will display if the procedure cannot be
completed. Exit the diagnosis program, and solve the error before
attempting SAS calibration again.
Figure 6-19
Sample SAS Function Screen 1
Figure 6-20
Sample SAS Function Screen 2
