58
USB Cable Connection
Use the provided USB cable to connect the tablet and the MaxiVCI Mini. A
green check will display atop the VCI navigation button at the bottom of the
screen and the MaxiVCI Connection LED will light solid green when
connection between the devices is successful.
NOTE
The USB communication method will take priority over BT communication if
both are enabled.
No Communication Message
A.
An “Error” message will display if the MaxiVCI Mini is not connected
correctly. To resolve this issue, please do the following.
Check if the MaxiVCI Mini is powered on.
Check if the MaxiVCI Mini is properly positioned.
Check if the Connection LED on the MaxiVCI Mini is illuminated for
BT or USB.
In case of BT connection, check if the network is configured correctly,
or if the right MaxiVCI Mini has been paired up with the tablet.
If communication is lost during diagnosis, ensure there is no
nearby object that might cause signal interruption.
Stand closer to the MaxiVCI Mini to obtain a stronger signal,
and a faster communication speed.
When using USB connection, check the cable connection between
the tablet and the MaxiVCI Mini.
Check the Power LED on the MaxiVCI Mini. A blinking red light
indicates there is a hardware problem with the MaxiVCI Mini.
Contact technical support for assistance.
B. A message will display if the MaxiVCI Mini is unable to establish a
communication link. The followings are the possible causes:
The MaxiVCI Mini is unable to establish a communication link with
the vehicle.
The system selected for testing is not equipped on the vehicle.
There is a loose connection.
There is a blown vehicle fuse.
