65
When the programming is complete, the programmed ID will display in the
column to the right of the wheel designation. In the pictured example, the new
ID is displayed to the right of the FL column.
By using
Copy by Activation
, the sensor ID that is retrieved from activated
sensor is programmed to the new MX-Sensor.
Because the IDs of the original sensor and the new MX-Sensor are the same
and the ID is already recognized to the vehicle ECU, there is no need to
perform the
Relearn
function when the new programmed sensor has been
attached to the same wheel.
If the IDs retrieved from sensor activation and those registered to the TPMS
ECU are different, use
Copy by OBD
to program the IDs saved in the ECU
to the new MX-Sensor.
Copy by OBD
By using this function, the tablet will program the sensor IDs retrieved from
the ECU of the test vehicle to the new MX-Sensors.
Select a wheel location on the display and place a MX-Sensor near the top
right corner of the tablet. Tap
Copy by OBD
to program the new MX-Sensor.
Figure 5-20
Sample Copy by Activation Complete Screen
