41
NOTE
The surge protection device switch shows the indica
tions N, L1, L2, and L3.
Measuring the DC Voltage
Use a voltage tester to measure the DC voltage between the output terminals, make sure
that all the measured voltages are 0 volts.
Power module group output 1
— (A) to power module group output 1+ (B)
Power module group output 2
— (C) to power module group output 2+ (D)
EV charging cable 1 output
— (E) to EV charging cable 1 (F)
EV charging cable 2 output
— (G) to EV charging cable 2 (H)
