23
7. Lift the charger onto the wall dock by the hoisting equipment. Position the slot (B) on
the back of the charger to fit the metal plate (A) of the wall dock as shown below.
Meanwhile, the protrusion (C) on the wall dock and the groove (D) on the back of
the charger will be fitted as well. Ensure the charger is securely attached.
8. Remove the four lifting eyebolts and reinstall the top screws.
Step 2: Mounting the Holsters
1.
Place the holster rear covers against the wall, 1040 mm above the ground and 300
mm from the MaxiCharger.
2.
Mark the eight mounting holes on the wall. Remove the holster rear covers
temporarily.
