Auta hi-188, Руководство пользователя

Страница: 8 / 25

PLACA DIRECTORIO – DIGITAL PANEL DIRECTORY
7
Funcionamiento - Functioning
El Usuario
The user can perform the following actions:
•
CALL TO A FLAT BY CODE:
ƒ Introduce a numeric code up to 9 digits and press to perform the call.
•
CALL TO A FLAT BY NAME SEARCH:
ƒ Search inside the Data base using the arrows ( ‘ Å ’ , ‘ Æ ’ ) and, when the desired name
is found, the OK or the must be pressed to perform the call. Each time an arrow is
pressed, the screen will display the
Name
of the neighbour, some
Flat Information
and the corresponding
Call Code
.
ƒ If the user keeps any arrow pressed during two seconds, the registers will move
quickly through the screen.
ƒ If the Data Base contains marked registers
1
, pressing keys 1 and 3 the system will go
forward or backwards among the marks.
•
OPEN THE DOOR
ƒ If key is pressed, the display changes to “ ****** ”, waiting for an “Opening Code”
up to 6 digits. If the code introduced is valid and key is pressed again, the door
will be opened.
•
CALL TO SWITCHBOARD
ƒ If there is a Guard Porter Push-Button. Just press it.
ƒ It is also possible to call the guard porter pressing the key 0 and then . (See the
parameter ‘SWITCHBOARD’ in the Configuration Menu for further information).
ƒ Finally, any invalid code will directly perform a call to the SwitchBoard (if it exists).
User Screens
•
When someone gets close to the panel, three messages alternating on the screen can be seen.
* * a u t a * *
c o m u n i c a c i o n e s
P r e s s C o d e
a n d
F i n d a n a m e
w i t h
Å Æ
a n d O K
CALL TO A FLAT USING UP TO 9-DIGITS CODES:
•
To perform the call, (in example, a monitor responding to the code 555) the user must introduce
the code and then press the
OK button or the key. Whether the code is in the Data base or not
or if the telephone / monitor / SDL is available or it isn’t, there exist different display messages:
c o d : 5 5 5
N O T F O U N D
P E D R O
N O T A V A I L A B L E
1
To insert marks in the panel DB, use the application Directory v2.0 that comes with the auta software CD.
Main Screen 1
Main Screen 2
Introduce code 555
Press . The code doesn’t exist in the
Data base. (A call to the SwitchBoard
will be performed if it exits).
Press . The code exists, but there
is no answer from the telephone.
The ‘
Name
’ field is shown in this
case.
Main Screen 3