PLACA DIRECTORIO
– DIGITAL PANEL DIRECTORY
10
Funcionamiento
-
Functioning
*
O P E N I N G C O D E 1
1 0 1 0 1 0
•
At this point, we can go forward to the next parameter (the ‘Opening Time’ parameter) pressing
the
key, go through any of the 4 opening codes with the arrows (
Å
,
Æ
) or change them using
the keypad and the
OK
button to confirm. As an example, the common opening code 2 (which is
‘202020’), will be changed to the code ‘222222’.
O P E N I N G C O D E 2
2 0 2 0 2 0
O P E N I N G C O D E 2
2 2 2 2 2 2
O P E N I N G C O D E 3
2 2 2 2 2 2
•
At this point, if
key is pressed, the system will move on the parameter ‘Opening Time’. As
before, we will be able to change between the different options of the same parameter with the
arrows, modify them with the keyboard (and
OK
to confirm)
or go forward to the next parameter
pressing
again. The following screens will appear as we press the
key in this menu.
O P E N I N G T I M E 1
5 s e c
P A N E L N U M B E R :
1
P
A N E L : i n t e r n a l
S E L F S T A R T : y e
s
v 3 . 0 - 0 7 0 2 0 8
S W I T C H B O A R D : n
o
From the screen above, press ‘
Æ
’
once.
This operation changes the
open. code 1 to the open. code 2.
Introduce the right code (‘1’).
This code grants access to the
Configuration Menu
.
Press
.
The installer gets
access to the first parameter of the
Configuration Menu: The
‘Common Opening Codes’.
Introduce the new common
opening code ‘222222’
Press
.
The door opening times
can be configured here. Max = 9s.
Press OK to confirm.
A
confirmation beep will be heard.
Press
.
By default it will be the
panel number
1
. Max = 15.
Press
.
We change between
‘
external
’ or ‘
internal
’ panel,
depending whether the panel is wired
to the X line of an SDL or it isn’t.
Press
.
The self-starting in the
installation can be enabled or disabled
here. Also the soft version is showed.
Press
.
If there is a switchboard
in the installation, this parameter
should be changed to ‘yes’.
