PLACA DIRECTORIO
– DIGITAL PANEL DIRECTORY
9
Funcionamiento
-
Functioning
Configuration Menu (C+
+Configuration Menu Code (‘1’)+
)
•
This menu has been created to set the following 7 Panel Parameters:
o
OPENING CODE
. 4 different common “Opening Codes” up to 6 digits, to be assigned to the
postman or to the doorman, but not usually to the neighbours of the building. By default these
codes are
101010, 202020, 303030, and 404040. If these codes are all of them set with the
value ‘0’, the common opening code function will be disabled.
o
OPENING TIME
. 2 different configurable “Opening Times”. The first one will be used
when the user is outside the building
2
and the second one if the user is inside the building
(pressing the hall-button inside the building. This opening time is usually longer). By default
the
Time1=5 seconds
and the
Time2 = 8 s
. (Max Time for both = 9 seconds).
o
PANEL NUMBER
. There are not dip-switches any more to set the panel number. Now it is
configured with the keypad. By default, it will be set to
1
. The system allows to connect til 15
different panels. Be careful not to put the same panel number in multiple accesses installation.
o
PANEL internal / external.
The Panel should be configured as ‘
external
’ if it performs the
call through an SDL (connected to the X (external) line of the SDL), otherwise the Panel will
be configured as ‘
internal
’. From the v2.0, the screen will also show the software version and
an internal identification code.
o
SELF STARTING
. The self-starting can be enabled or disabled in this menu.
o
SWITCHBOARD
. This option should be enabled if the installation has a switchboard linked
to the Directory panel. This means that any call code (even a non existing one) will make a
call to the switchboard. If this option is configured as ‘
SWITCHBOARD: no
’ there is still
the possibility to assign the call code ‘0’ to a telephone / monitor that will work as if it was a
switchboard. The non existing codes introduced in the panel, will also be redirected to this
telephone / monitor. If the installation needn’t switchboard functions, it is recommended to
set ‘
SWITCHBOARD: no
’ and be sure not having any call code ‘0’ in the data base.
3
o
NEW ACCESS CODE
. It is strongly recommended to change the codes of the
Configuration & Directory menus. Keep in mind that these codes were, by default, ‘
1
’ and ‘
9
’
respectively. To change them just enter the new code and confirm it with
OK
.
•
To navigate through the parameters the
key should be used. To change through the different
options inside each parameter use the arrows (
‘
Å
’
,
‘
Æ
’
) and the
OK
key to confirm the changes.
Any numerical parameter can be changed directly with the numeric keypad, and confirmed with
the
OK
(a beep should be heard). To exit this menu, simply press the
C
key once.
Configuration Menu Screens
•
When an authorized installer press
C
and then
, the following screen appears waiting for a code:
2
That is when we call to a flat and someone opens the door, also when we introduce our personal ‘
Opening Code
’ or a
general ‘
Opening Code
’.
3
If there is a guard porter button in the installation and it is pressed: If ‘
SWITCHBOARD: yes
’ it will make a call to the
guard porter, if ‘
SWITCHBOARD: no
’ it will call the telephone / monitor with the ‘
call code
’ 0 only if it exists in the DB.
Press C+
