11 | Installation
EN
Operating manual Folding corner fireplace inserts
52
Fig. 28:
Screwing out the grub screws
7) At the top on the inside of the door, screw out the
grub screws.
Fig. 29:
Modifying the reflectors
8) Remove the lower reflectors and mount them at the
top with the screws, in the places where the grub
screws were screwed out.
ð
The reflectors must be turned 180° in the door
when it is hinged to the right (horizontal part al-
ways at the bottom), as otherwise the secondary
air intake is severely impaired, resulting in poorer
combustion and heavy soiling of the glass pane.
2
1
Fig. 30:
Changing/adjusting the parts
9) Unscrew screw (1) to the correct height.
ð
The correct height can be measured from the
screw (2).
10) Screw in screw (2).
11) Rotate door by 180° and install it as described in the
}
auf Seite 49].
12) Adjust door. Proceed as described in the section Ad-
}
auf Seite 64].
