Austria Email WPA 233 E-LF, Инструкция по использованию и установке

Страница: 7 / 35

© Austria Email AG
6 V1.0 1/2021
- Explanation of the entire system’s operation.
- The fitter must remind the user to carry out regular maintenance works on the appliance to
ensure its proper functioning throughout the entire life-span.
- All maintenance works must be written down in a service record at the end of this instruction
manual.
- All documentation enclosed to the appliance must be handed over to the end user.
2.2.4 Obligation of the User
In order to ensure undisturbed and efficient operation of the appliance, the user must consider the
following instructions:
- Thoroughly read the enclosed instructions for safe use and installation.
- Installation and start-up of the appliance must be performed by an authorised and
technically qualified person.
- Ask the authorised installer to explain in detail the functioning of the appliance and how it is
managed.
- Ensure that the appliance is regularly inspected and maintained by an authorised and
qualified after-sales service technician.
- Keep these instructions for use and maintenance in a suitable dry place near the appliance.
2.3 Conformity
The CE sign confirms that the appliance is manufactured in compliance with the currently valid
directives and standards.
2.3.1 Directives
- DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 12 December 2006 on the harmonisation of the laws of Member States relating to
electrical equipment designed for use within certain voltage limits
- DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 17 May 2006 on machinery, and amending Directive 95/16/EC
- DRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 29
May 1997 on the approximation of the laws of the Member States concerning
pressure
- DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 15 December 2004 on the approximation of the laws of the Member States
relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2.3.2 Standards
- EN 60335-1:2012
- EN 60335- 2-21
- EN 60335-2-40
- EN 50417
- EN 60730-1
-
EN 61000-3-2:2006
2.3.3 Factory Testing
In order to ensure high quality of each heat pump before it is sold, the following tests are carried out:
- tightness of the refrigeration circuit