Austria Email SISS 1250, Инструкция по эксплуатации и монтажу

Страница: 11 / 49

11
Id.Nr.: 236921-9
1. Function U E
The service water stored in the internal boiler enamelled according to DIN 4753 is heated indirectly by the surrounding hea-
ting water. The buffer content (heating water) can be heated indirectly by means of a large-surface pipe register that is wel-
ded in permanently, and/or directly through the coupling sleeves by means of a boiler, heat pump, solar system, screwed-in
heating for the buffer area and a built-in heating for the service water area.
The array and number of sleeves, as well as the pipe register that is available on various models allow a multivalent opera-
tion.
2. Hot Water Demand U E
The hot water demand in a household depends on the number of persons, the sanitary installations of the apartment or the
house, as well as the individual habits of the user.
The following table provides a few standard values regarding consumption fi gures.
The temperature of the cold water required for mixing to the specifi ed hot water temperature was estimated
at approx. 12 °C.
Due to the hysteresis of the temperature control (± 7°K) and possible radiation losses (cooling-down of the pipelines), the
temperature specifi cations are subject to an accuracy of ± 10°K.
Hot water demand in litres Required storage water
quantity in litres
at 37 °C at 55 °C with 80 °C with 60 °C
Full bath 150 - 180 55 - 66 78 - 94
Shower 30 - 50 11 - 18 16 - 26
Washing hands 3 - 6 1 - 2 1,6 - 3,1
Hair wash (short hair) 6 - 12 3 - 4,4 4,2 - 6,3
Hair wash (long hair) 10 - 18 3,7 - 6,6 5,2 - 9,4
Use of bidet 12 - 15 4,4 - 5,5 6,3 - 7,8
Washing dishes
for 2 persons per day 16 10 14
for 3 persons per day 20 12,5 18
for 4 persons per day 24 15,2 21,5
House cleaning per bu-
cket of cleaning water
10 6,3 9