Water Cooler Instruction Manual
Model: 826A
© Aurora Scientific, 2015 VER. 1.00
page 9
3
Maintenance
To prevent air from getting into the system and causing problems with coolant flow, the user should
periodically check the coolant level in the reservoir to verify that it
is full (approximately 1.5cm or ½” from
the top) and top up as necessary.
Aurora Scientific recommends replacing the coolant annually to keep your system operating optimally.
If you run out of coolant, distilled water can be used to top up the system. DO NOT use ordinary tap
water, as this will corrode the aluminum radiator inside the unit. Additional bottles of coolant can be
ordered from Aurora Scientific in the event that the coolant supplied with the system runs out.