20 US-EN
You may reactivate reception by pressing and holding the
+ /
MEM
10
and
– / CH
button
9
for three seconds until a
radio tower symbol in the time panel
5
becomes animated.
The time can also be set manually. For more details please
refer to section
Basic settings
.
Wall-mounting the temperature station and / or the
outdoor sensor:
Note:
This step requires an electric drill and a crosshead
screwdriver.
DANGER TO LIFE, RISK OF INJURY
AND PROPERTY
DAMAGE!
Carefully read the instructions for use and safety
notes for your drill.
DANGER TO LIFE!
Be careful that you do not hit electrical,
gas or water lines when drilling into the wall. If necessary,
check the wall with a wall scanner before drilling.
Outdoor sensor
Mark the location of the hole (D 0.2 in / 6 mm) on the wall.
Note:
Use the included drilling template intended for marking
the drill holes.
Drill the hole with an electric drill.
Push the dowel
28
into the drilled hole.
Using a crosshead screwdriver, screw the screw
27
into the
wall anchor.
Hang the outdoor sensor by placing the hanger
21
on
the screw.
337765_1907_aur_Funk-Wetterstation_Content_US.indd 20
13.01.20 10:19
