28 US-EN
Select a radio channel by pushing the channel selector
24
to
CH1
,
CH2
or
CH3
.
Press and hold the
– / CH
button
9
until the reception signal
flashes on the outdoor temperature panel
3
.
Press the
TX
button
22
to manually initiate the outdoor sensor
radio signal. If reception is successful, the temperature and
moisture on the outdoor temperature panel
3
will now be
displayed on the new radio channel.
Close the battery compartment
25
again.
Changing the radio channel display
on the weather station
If the weather station is receiving the outdoor sensor radio signal,
it will automatically display the appropriate channel.
However, you can also manually set the display of various radio
channels.
Press the
– / CH
button
9
repeatedly to switch between the
displays
CH1
(only display channel 1),
CH2
(only display
channel 2),
CH3
(only display channel 3) and
(display
all channels alternately in a loop).
Note:
Only the values from outdoor sensors which are connected
to the weather station will be displayed.
If you are using several outdoor sensors you should select
a different radio channel for each outdoor sensor.
337765_1907_aur_Funk-Wetterstation_Content_US.indd 28
13.01.20 10:19
