17
US-EN
Initial use
Note:
First insert the batteries in the outdoor sensor, then the
main station.
Setting up the products
ATTENTION:
First start the outdoor sensor, then the main station.
If possible, do not expose the outdoor sensor to direct sunlight.
Place the main station on a horizontal, level surface or mount
to a plumb wall.
The outdoor sensor can be hung by the hanger
21
or place it
on a horizontal, level surface.
Operating the outdoor sensor
Open the battery compartment
25
on the rear of the device
by pushing the battery compartment cover
26
in the direction
of the arrow.
Insert two type AAA batteries into the battery compartment
25
as shown.
Close the battery compartment
25
again. The control LED
19
on the front of the outdoor sensor lights up briefly. Afterwards,
the control LED
19
lights up once every minute to signal that
transmission is taking place.
Operating the weather station
You can either operate the weather station with the included power
adapter
14
or using batteries.
337765_1907_aur_Funk-Wetterstation_Content_US.indd 17
13.01.20 10:19
