18 US-EN
Corded operation:
Attach the power adapter plug
16
on the power adapter
14
into the connector socket
13
on the weather station and con-
nect the power adapter
14
to an easily accessible outlet.
Battery operation:
Open the battery compartment
12
on the rear of the device
by removing the battery compartment cover
15
.
Insert two type AA batteries into the battery compartment
12
as shown.
Close the battery compartment
12
again.
Once the power supply has been established, the display will light
up and go through a brief check of the display elements.
The weather station will now attempt to connect to the outdoor sen-
sor. The reception symbol flashes on the outdoor temperature
panel
3
.
Note:
If no outdoor temperature is displayed within around 3 min-
utes, the weather station will stop the reception search. The recep-
tion symbol goes out and
and
are displayed on the
outdoor temperature panel
3
.
It is possible that no signal can be received due to the surrounding
buildings or because the distance is too great.
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
Press and hold the
– / CH
button
9
until the reception signal
flashes on the outdoor temperature panel
3
.
337765_1907_aur_Funk-Wetterstation_Content_US.indd 18
13.01.20 10:19
