DEMO XTR-8LR100
DEMO XTR-8LR10
User Manual
Le caratteristiche tecniche possono subire variazioni senza preavviso. AUR°EL S.p.A. non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
AUR°EL S.p.A. Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 2.2 17/05/2016
Page
9
of
17
Data transfer procedure in NORMAL:
In the default configuration, the demo-boards do not require any parameterization.
You should connect the demo boards to the serial port of the PC at speed of 115,2kbps.
Using Realterm set communication speed to 115,2kbps, a START bit, 8 data bits, a bit of STOP, no parity.
Select from the menu “Port 57”, used in this example as associated port to DEMO XTR-8LR100, then press
the "Open" button.
From the "Send" menu of “Realterm" type a sequence of characters then press “Send ASCII”, LED2 turns
off and LED1 turns on, during transmission time.
Unit 2 will receive the message and forward it on the own serial port.
Port 57: message sent from unit 1, see the field
Send ASCII.
Port 58: message received from the unit 2,
displayed.
Operation is reciprocal, so it can be transmitted from the 2 to the 1.
NORMAL mode does not use unique identifiers of the various terminals, those in listening, working on the
same frequency and with the same settings radio, will receive the same message.
