DEMO XTR-8LR100
DEMO XTR-8LR10
User Manual
Le caratteristiche tecniche possono subire variazioni senza preavviso. AUR°EL S.p.A. non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
AUR°EL S.p.A. Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 2.2 17/05/2016
Page
3
of
17
LED RX or TX “PONG”
Led 1 green used in the TEST mode
On when it sends or receives the message "PONG",
or in the other modes it indicates the transmission status
LED RX or TX “PING”
Led 2 green used in the TEST mode
On when it receives or sends the message "PING"
In the other modes it indicates the reception status
Analog Input
Analog input 0,05 ÷ 4,3V with resolution 12bits
Buttons
No functionality associated
Reset Button
Press (0.5 sec) and release to reset the uC of the XTR-8LR100/8LR10
Test Point Current
Open jumper and insert an ammeter to check the consumption of the radio
module
(1): No function for Demo Board XTR-8LR10
(2): Only for Demo Board XTR-8LR100
Picture 4:
Description bottom side of demo XTR 8LR100/XTR-8LR10
4xAA Batteries: Batteries for working in stand-alone.
Insert on the battery holder, 4 x AA non-rechargeable 1.5V batteries, paying attention to the direction
indicated on the bottom of the same.
