DEMO XTR-8LR100
DEMO XTR-8LR10
User Manual
Le caratteristiche tecniche possono subire variazioni senza preavviso. AUR°EL S.p.A. non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
AUR°EL S.p.A. Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 2.2 17/05/2016
Page
4
of
17
Installing procedure
To start using the DEMO XTR-8LR100/8LR10 follow the steps below:
1.
Insert the 4 AA batteries as shown in Picture 4.
Power supply DEMO XTR-8LR100/8LR10 placing the Power Switch in ON position and be sure the
3 jumpers Set_A, SET_B and SET_C are open.
2.
Install on the computer drivers for the USB port, for this purpose use the following link
http://www.ftdichip.com/Drivers/D2XX.htm
taking care to identify the proper drivers for the
operating system from the PC.
3.
Connect the USB cable to the demo and the PC: the computer should report the identification of USB,
communicate the outcome of the installation of the drivers and the number of the COM used. If this is
not reported, then you should open the page Windows about device control, click on the menu "Ports
(COM & LPT)”, click the right button on USB / Port installed, and from the properties of each of
them, try the COM associated to FTDI driver.
