DEMO XTR-8LR100
DEMO XTR-8LR10
User Manual
Le caratteristiche tecniche possono subire variazioni senza preavviso. AUR°EL S.p.A. non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
AUR°EL S.p.A. Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 2.2 17/05/2016
Page
2
of
17
Picture 3:
Description top side of demo XTR-8LR100/XTR-8LR10
External Supply 8÷12Vdc
Plug input male general supply 8÷12Vdc 300mA
Power Switch
General switch power board.
ON= board switched on
OFF= board switched off
Power Supply Led
Red led power indicator. Switched on with Power Switch in ON position.
Antenna
SMA female socket 3,5 mm. Connected directly to antenna pin of XTR-
8LR100/8LR10
USB/B Type Female
USB socket type B. Connect to computer via USB cable. The USB port uses
an internal shifter for serial port FTDI1235-C.
It is not possible to power supply the board with this port.
3V/UART
Connections RX/ TX/ RTS/ CTS of UART port.
They are signals from relative pins of the module XTR-8LR100/8LR10, with
logic levels 0V e + Vcc.
SET A
Close the jumper to activate the NORMAL mode
SET B
Close the jumper to activate the “TX Cyclic” mode (2)
Or closed together with SET_A actives mode "RX Cyclic" (2)
Close the jumper to activate TEST mode
for DEMO XTR-8LR10
SET C (1)
Close the jumper to activate TEST mode
Or closed together with SET_A actives mode " Tx ADC Cyclic" (2)
