24
25
Timeline
The timeline on the LCD is divided to 24 sections. Each corresponds
to 1 hour of the day.
Black rectangles above the timeline indicate day temperature set for
the specific hours. Night temperature is set when no rectangles are
present.
Example:
The above figure shows that from 6.00 to 23.00, the controller will
control the heating equipment to ensure day temperature in the
room ( ). From 23.00 to 6.00, the controller will switch to night
temperature ( ).
PROGRAMMING INTRODUCTION
Proper program should be set for every day of the week so that the
controller know when to switch between the night and day
temperatures. To do so, you can use one of the factory presets
available (from 0 to 2):
P
rogram
0
– anti-freeze
Non-editable factory program. Intended for all-day anti-freeze
temperature setting.
Program
1
– weekly
Non-editable factory program. Day temperature setting from
5:00 to 8:00 and from 15:00 to 23:00.
Program
2
– weekend
Non-editable factory program. Day temperature setting from
6:00 to 23:00.
Program
3, 4,….,8
– user-defined
3 to 9 are user-defined programs. They can be modified and
adjusted to your demand.
Factory programs
