28
29
To set the program:
1.
Press the
key. Program
number segment will start blinking.
2.
Press the
key as many times as
required to set the day of the week
for the program.
3.
Press the
key several times to
select the program number
required. Programs
0-2
are factory-
set, programs
3-8
can be edited.
4.
All (24) black rectangles will appear
on the timeline. Each of them
symbolises 1 hour. A visible
r e c t a n g l e i n d i c a t e s d a y
temperature set for the given time.
If no rectangle is displayed, night
temperature is set.
Prog
zega
Prog
MODIFYING USER-DEFINED PROGRAMS (prog. 3...8)
Blinking rectangle indicates the point of the timeline which is
modified.
Option 1
If, for some reasons, you would like to suspend program execution
for a given time, it is possible to prolong the day or night mode to
max. 24 hours. To do so:
Press the
key for 3 seconds. Then, using the knob, set the
number of manual operation hours (max. 24 hours) and confirm
setting with the
key.
<sun>
OK..
5.
Press the
key to select day
(rectangle on) or night temperature
(no rectangle). Then, select the
time interval for the temperature
selected with the knob.
6.
By pressing the
key and
selecting time interval the entire
program is modified.
7.
Confirm selection with the
<sun>
<sun
<sun
key.
NOTE:
Modified program for the individual day can be selected and
executed also on a different day of the week.
Manual control