16
ARATON 2100 TX
IV.
TESTING THE RF TRANSMISSION
RANGE
1. Press UP
( )
button until the setpoint
temperature is
higher than room temperature by
a few degree.
2.
Wait for a few seconds.
3. Check the green LED. It should be On.
4. If the LED is not On, try to locate the Control
Center
closer to the Receiver. Press D
OWN ( )
button to adjust
the setpoint temperature to be
lower than room
temperature to "turn of" the
receiver.
5. Repeat steps 1 to 3.
6. The receiving range between Control Center and
Receiver is 100M in open area. When placed
indoor, this distance may be shorter because of
blocking by concrete wall etc, but is enough for
most household application.
7. Press RESET button after receiving range testing.
V.
TEMPORARY OVERRIDE
5.1)
Override the Operation Mode
At the normal operation mode, press the
CONF/ECON ( ) button will toggle the current
set temperature to comfortable mode or economic
mode. If the operation mode is being override, the
HAND ( ) icon will be turned on with the current
operation mode icon.
