3.3)
Battery Installation
Your thermostat is using two (2)
"AA"
size batteries to operate.
To power-up
the unit, insert two
"AA" batteries into
the battery
compartment of the front
housing.
When power is applied for
the first
time, the display must show
time
and the day as well as the room
temperature (for example 28.5°C).
If the display is different, press the
RESET button. Use
a fine probe such
as straightened paper clip to gently
push the RESET button.
After installation of the batteries,
put back the back
housing to the
control center and then the stand.
Before turning on the main switch
of the system, press
the reset button
once .The thermostat is ready for use.
3.4)
Setting Clock
1. Press the
button to clear all digits except
the
day indicator and the time display. The Day
indicator is flashing.
2. While Day indicator is flashing, press
or
button to adjust.
3. Press the
button again,
hour
digits are
flashing instead of day indicator. Press
or
button to adjust. Press and hold the
or
button will speed up the adjustment rate.
4. Press the
button again,
minute
digits are
flashing instead of hour digit. Press
or
button to adjust. Press and hold the
or
button will speed up the adjustment rate.
5. Press the
button again to return to normal
operation mode.
6. The unit will return to normal operation mode if
no
key is pressed for 10 seconds.
12
ARATON 2100 TX
