6
Installation instruction
RWA - Control Unit EMB 7300
s
afety
i
nstruCtions
01
USB
Declaration of Conformity
The control device is manufactured and inspected for
its intended use in accordance with the European guide-
lines. The relevant Declaration of Conformity is at hand.
If the use or operation of the control device or the con-
nected window drives deviate from this a risk assess-
ment must be performed for the complete powered
window system and a Declaration of Conformity according
to Machinery Directive 2006/42/EG issued as well as a
CE labeling obtained.
g
UidElinEs
And
s
tAndARds
It is essential that the most recent versions of country-
specific laws, regulations, provisions and standards be ob-
served during installation and for electrical connections.
These are for instance:
State building code
with special construction regulations
such as:
- Industrial construction guideline
- Venue regulations, etc.
MLAR
- Sample Guideline on Conduits German desig-
nation
Provisions of the fire protection authorities TAB
(technical connection conditions)
for Utility companies
German Regulations for Occupational Insurance
Schemes
, such as:
- ASR A1.6 and 1.7 (substitute for BGR 232)
Additional standards and guidelines
, such as:
EN 60335-2-103
Safety of household and similar elec-
trical
appliances
EN 60730-1
Automatic electrical controls
EN 12101-10 / prEN 12101-9
(ISO 21927-9/10)
Smoke
and
heat
control
systems
DIN 4102-12
Functional integrity of electric cable
systems
VDE 0100
Installation of high-voltage systems up
to
1000
V
VDE 0298
Use of cables
VDE 0815
Wiring cables (for telecommunication
and
data
processing
systems)
VDE 0833
Alarm systems
VdS-Guidelines
: 2593, 2581, 2580, 2592
Accident prevention regulations
, in particular:
- VBG 1 „General rules“ and
- VBG 4 „Electrical systems and equipment“.
For placing on the market, installation and operation out-
side Germany, the relevant national laws, regulations,
standards and safety provisions apply.
The contractor is responsible for proper installation or
operation and the issue of a Declaration of Conformity
according to European guidelines.
The prerequisites of the system (see chapter “
S
yStemS
confi
-
guration
of
Software
”) must be checked prior to installation.
The “Software clause for handing over the standard soft-
ware as part of shipments” of the ZVEI (German Electrical
and Electronic Manufacturer’s Association) is accepted as
legally binding upon installation. See our homepage:
.
(www.aumueller-gmbh.de)
We, therefore, recommend protecting the operating system
and system software sufficiently against unauthorised inter-
ference (e.g. by using a password) and attending the trai-
ning provided by the manufacturer.
Replacement parts
System components are to be replaced only with spare
parts from the same manufacturer. Liability, warranty and
customer service are void if third-party parts are used. Only
original spare parts from the manufacturer are to be used
for expansions.
Ambient conditions
The product may not be subjected to impacts or falls, or
to vibrations, moisture, aggressive vapours or other harmful
environments, unless the manufacturer has released it for
one or more of these environmental conditions.
•
Operation:
Ambient temperature: -5 °C … +40°C
Relative humidity: < 90% up to 20°C;
<
50%
up
to
40°C;
no
formation
of
condensation
•
Transport / Storage:
Storage temperature: 0°C … +30°C
Relative humidity: < 60%
Accident prevention regulations and employer‘s
liability insurance guidelines
For work on or in a building or building part the provisi-
ons and instructions of the respective accident prevention
regulations (UVV and employer‘s liability insurance guide-
lines (BGR /ASR) must be observed and obeyed.
The configuration software of the control de-
vice largely excludes damage caused by incor-
rect settings. As a precaution, we advise that
A
UMüllER
, as manufacturer, cannot assume
liability for damage caused by using
A
UMüllER
software, because
A
UMüllER
has no influence
on a perfect system environment or property-
specific systems configuration.
USB
Modifiable standard configurations are parti-
cularly emphasized in these instructions. The
software is part of the shipment of the Control
Unit. The functional range of this unlicensed
version can be expanded by activation against
payment (license).
