19
Installation instruction
RWA - Control Unit EMB 7300
Program Handling
The user interface of the program allows fast and intuitive working.
A HELP-function provides all necessary information.
The Central EMB 7300 was tested in the default setting
(factory setting) by VdS. Changes to the central con-
figuration can only be performed by the approved in-
staller (only with VdS systems).
Check for proper operation after each configuration of
the Control Unit. We cannot assume liability for faults as
a result of an incorrect system configuration and must
exclude all warranty claims.
System Requirements
The software can be installed on a portable computer that has to meet
the following system requirements:
CPU:
1 GHz or faster.
Operating systems:
Microsoft® Windows 7 - (64 Bit)
Microsoft® Windows 10 - (64 Bit)
Memory:
512 MB RAM or more
Hard disk:
at least 100 MB free memory space required
Accessories:
USB connection for connecting computer<>Control Unit,
Internet connection for system installation and updates.
I
nstAllAtIon
step
7:
s
ystEM
ConfigURAtion
Using
softWARE
: EMB k
oMpAkt
USB
Our software requires NET 2.0 Runtime™ and the Visual
C 2008™ Redistribution-Package for operation. These
packages will be automatically installed by the set-up
program without express installation note if they are not
available in the system.
!
Installation
A free version of the system software (
version VIEW
) can be
downloaded from the homepage
www.aumueller-gmbh.de
.
The software can be installed on a computer (notebook or net-
book). Please pay regard to the hardware and system requirements
(see below).
Follow the instructionsdisplayed on the screen to install the program.
The software offers many features to adapt the system
to your requirements. However, you should be aware
that not all possible functions can be used without
activating the software by purchasing a license.
If you wish to unlock the software, please contact us for a license code.
After this code has been entered, you can use the paid functions as well.
With the installation the „Software clause in respect of
the licensing of standard software as part of deliveries“
set out by the ZVEI (Zentralverband Elektrotechnik- und
Elektronikindustrie e.V. - Central Association of the
German Electrical and Electronics Industry) is deemed to
be legally binding.
Connecting the computer with the Control
Unit
• Switch on the computer and
• connect via USB to the Control Unit (see illustration).
• Then start the computer with the software already installed.
To avoid data losses the USB cable should not be longer
than 5 meters. We advise against using a USB hub.
Different to the usual USB connections it does not show
up on the Windows toolbar
USB
2,5 A
5 A
20 A
10 A
USB
Computer
with Software
„EMB Kompakt“
Connecting cable:
USB-A-connector
on mini USB-B-connecter
I
nstAllAtIon
step
7:
s
ystem
C
onfiguration
u
sing
s
oftWare
: „emb k
omPakt
“
06
USB
