manualshive.com logo in svg

AUMA SARV 07.2, Руководство по эксплуатации, Страница: 13 / 96

Поделиться
Скачать
AUMA SARV 07.2 Скачать руководство пользователя страница 13

4.

Transport, storage and packaging

4.1.

Transport

For transport to place of installation, use sturdy packaging.

Suspended load!

Death or serious injury.

→

Do NOT stand below suspended load.

→

Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.

→

Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.

→

Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.

→

Actuators mounted to controls: Attach ropes or hooks for the purpose of lifting
by hoist only to the actuator and NOT to the controls.

→

Respect total weight of combination (actuator, actuator controls, gearbox, valve)

→

Secure load against falling down, sliding or tilting.

→

Perform lift trial at low height to eliminate any potential danger e.g. by tilting.

Figure 10: Example: Lifting the actuator

Delicate cooling fins, risk of damage!

During transport or assembly without the supplied transport protection, the cooling
fins may either break or bend if they hit other objects during inappropriate transport.

→

During transport and installation, leave the supplied cooling fin transport protec-
tion on the cooling fins.

13

SAV 07.2 – SAV 16.2 / SARV 07.2 – SARV 16.2 Control unit: electronic (MWG) 
ACV 01.2 HART 

Transport, storage and packaging

Содержание SARV 07.2

































































































Отзывы:

Нет отзывов